Pepper flash plugin is installed but doesn't ... - Ask Ubuntu

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

How I started running a v.15.0 node for less than 60 USD. (Less than any raspberry pi setup I have seen.)

Hey,
I want to share this easy way to start a full-time node. I chose to run a full-time node on an independent device for security, and because my laptop is not on a wired connection enough to benefit the network. Also, I felt the need to better understand the role nodes play in Bitcoin security, and how they operate. So I decided to actually explore the technology, and familiarize myself with some of the basics by setting up a Bitcoin Core v.15.0 full node.
  1. I found a dell latitude 2120 on ebay for about 40 USD.
  2. Once it arrived I installed Lubuntu from a bootable flash drive. for linux user
  3. Download the Bitcoin Core GUI or compile it in command line with the help of Mr. Antonopoulos to really feel like a super BTC programmer.
  4. Run the Bitcoin Core GUI. (or in command line if you followed Mr. Antonopoulos directions and chose to configure installation without a GUI.)
  5. The GUI should show the process of syncing with the network. This took about 5 days for my latitude 2120.
  6. While it syncs you need to open a direct port. This can be accomplished by going to your routers settings and adding a port forward option. You may also need to reserve an ip address for the latitude 2120. (You can make a static ip in linux connections options>ipv4 settings.)
  7. Once syncing is complete check to see that more than 8 connections establish after a few minutes running. Greater than 8 means you have in-bound connections that allows you to serve historic blocks to other nodes, and other necessary communications for a full-node. You can also just check to see if port 8333 is open.
  8. Troubleshoot and configure.
I will admit, I had some problems opening the qt file after extracting it. Not sure if I was missing something or Lubuntu was missing something. Regardless, I just compiled it in command line without any problems.
submitted by Bruceleeroy18 to Bitcoin [link] [comments]

Getting scared. Do I need a new computer?

THROWAWAY: Many months ago a friend of mine gave me some bitcoins. In fact, he gave me 10 bitcoins and told me to hold on to them, and now my little wallet hold almost 2,000 virtual dollars. I am not sure that I want to sell my coins yet, but if the value keeps rising, I will need a better way to store my coins. Right now I am holding them on blockchain.info (thanks to my friend), and I use the Chrome extension in order to keep my account more private and more safe. However, I have been reading a lot on here about why I shouldn't hold large amounts in a hosted wallet. So I decided to download the bitcoin qt client for my Ubuntu machine, but since my computer is so old, it freezes and crashes before the blockchain downloads.
So my question is: what is the best way to store these coins if the price skyrockets? At what point do I stop trusting online wallets? I mean, I really don't want to hold a 100,000 dollars online, although I have a feeling that some people do.
I have a garbage computer and the Bitcoin-QT software doesn't play nice. I am also having some trouble with Electrum and I don't want to lose my coins. Isn't there a way I can just download a copy of my wallet from blockchain.info and back it up in on a secure flash drive (like in a truecrypt container). Or do I really need to have bitcoin software installed? If so, I may have to buy a new computer.
submitted by plead_the_5th to Bitcoin [link] [comments]

How to install the QT Wallet - GNU/Linux Version - Ubuntu 16.04 How To Install Bitcoin Core And Multibit Wallet On Ubuntu 14.10 How to Install Bitcoin Core Wallet on Ubuntu 16 Install Qt Creator in Ubuntu 14.04 LTS Dash: QT Wallet Installation Guide - Linux = G15E01

Install Ubuntu (8 Steps) I assume that you have access to an old windows laptop / desktop which you can use for this project. Before you begin make a backup of any files on your laptop / desktop because we are going to completely wipe your computer and install a fresh (secure) free operating system called Ubuntu. Plug in a 16GB (or larger) USB into your computer Go to https://ubuntu. I have Pepper Flash Plugin installed, but it doesn't work on chromium and still every webpage prompts to install Adobe flash. I removed and installed it again but nothing changed. I'm sure it's installed because with attempt to new install get this message: sudo apt-get install pepperflashplugin-nonfree Reading package lists... Done Building ... Bitcoin Core is a community-driven free software project, released under the MIT license. Verify release signatures Download torrent Source code Show version history. Bitcoin Core Release Signing Keys v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ Or choose your operating system. Windows exe - zip. Mac OS X dmg - tar.gz. Linux (tgz) 64 bit. ARM Linux 64 bit - 32 bit. Linux (Snap Store) Support ... I am installing Bitcoin-Qt and have been reading about Bitcoin basics, but I found very little information on the client. I have a few questions about the Bitcoin-Qt program (v0.8.1-beta under Windows 7), Where is the complete Bitcoin-Qt documentation? I can not find it. How do I change the file locations for the block-chain storage? I want to install Ubuntu on my laptop that doesn't have a CD-ROM drive and I have no spare USB disk. I've tried Wubi, but that doesn't seem to work (since it prompts me to have the CD in the drive, which I don't have). How can I install Ubuntu, easily and in a fast way? P.s: I want to dual boot it with Windows 7 (which was preinstalled). Edit:

[index] [14275] [20724] [18523] [40888] [28922] [26776] [39777] [51433] [37280] [35633]

How to install the QT Wallet - GNU/Linux Version - Ubuntu 16.04

To add the PPA and install Bitcoin open a terminal window (press Ctrl+Alt+T) and copy+paste the following lines: sudo apt-add-repository ppa:bitcoin/bitcoin -y sudo apt update && sudo apt install ... DogeCoin QT Core Wallet Install plus ... Compiling Bitcoin Core Source Code - 2017 debian/ubuntu /linux with Music - Duration: 23:33. Bilal Haider 5,960 views. 23:33. Get Bitcoin Wallet In Linux ... Instructions on how to install the wallet in Ubuntu 16.04 Video created by Ivan https://www.youtube.com/channel/UCzt0979hcx-WYAcEh0YBmhA Wallet installation of VERGE on Ubuntu 15.1. Includes wallet installation, creation of a desktop launcher and wallet encryption install qt creator ubuntu command line ubuntu install bitcoin qt install qt sdk ubuntu install qt 5.2 ubuntu install litecoin qt ubuntu install qt 4.7 ubuntu install phonon qt ubuntu uninstall qt ...

#